Medical Grade Platinum Silicone Rubber Ozone Resistance Liquid
Silicone Rubber Tube
Description
LSR RH6250-40YH is food grade liquid silicone rubber for injection
molding processes. At higher temperatures the safety operation time shortened. LSR RH6250-40YH liquid silicone rubber is platinum cured(vulcanized) materials which are mixed in a 1:1 ratio
by weight. This product is suitable for the two-component injection molding
process. LSR is platinum cured(vulcanized) materials which are mixed in a
1:1 ratio by weight.
Typical Properties
| LSR- RH6250 - 40YH |
| Properties | Unit | A | B |
| Appearance | / | transparent | transparent |
| Viscosity | mPa.s | 1400000-2000000 |
| Density | g/cm3 | 1.10±0.02 |
| Shore A Hardness | A/JLS | 40±3 |
| Tensile Strength | MPa | ≥7.5 |
| Elongation at break | % | ≥550 |
| Tear Strength | KN/m | ≥20 |
| Linear Shrinkage | % | ≤0.1 |
| Tensile set | % | ≥1.7 |
| Rebound | % | ≥55 |
| Compression set | (22 hrs at 175℃) % | ≤35 |
These figures are for reference only, please contact us for
details.
Typical properties of the vulcanisate:
The mixing ratio of components A: B = 1: 1.
Applications
Because of the outstanding properties, LSR RH6250-40YH Lquid
silicone rubber is particularly suitable for the following
elastomeric articles: medical sacculus, negative pressure ball,
catheter connector, sealing elements, diaphragms, ear plugs,
bellows, baby teats, respiratory devices, air vent flaps, tube
connectors, catheters, parts for medical technical equipment, mat,
etc.
Certificate
Rui-He RH6250-40YH Liquid silicone rubber obtained the following
test certificate: RoHS, FDA, MSDS, LFGB, ISO9001:2016.
Packaging & Storage
- LSR-RH6250-40YH Medical is available in 20kgs pails or 200kgs
drums.
- Store in a cool dry place out of direct sunlight, use it within 12
months from the day of manufacture.
Notice
This product cannot be contacted with compounds containing N, P, S
to avoid affecting the catalytic effect of platinum.
FAQ
Q: Why is the tear strength of the silicone mold weak?
A: There are three reasons:
- In order to reduce the viscosity of silicone rubber and pursue a
good quality, you may add a lot of silicone oil into the silicon
rubber when making molds. In fact, it might have just the opposite
effect. The tension and the tear strength will be reduced badly
with the addition of silicon oil. And the silicon molds will be in
a weak and flimsy manner.
- You may add too much catalyst into the silicone rubber, we suggest
customers add catalyst no more than 5%, 2%will be perfect.
- You may use the silicone mold too early after it finished. We
suggest the customer begin using the molds after 24 hours. What’s
more, it will be better if you can make an outer mold to protect
the silicone mold.
Why Choose Us?
1. 15 years of manufacturing experience focus on silicone rubber
2. All Products shipped is Up to FDA, Rosh, Reach, LFGB, testing standard
3. Overall quality controlling procedure and perfect service to you
4. Offer to tailor the order accordance with customer's requirement in detail.
5. 800 tons solid silicone rubber, 300 tons LSR silicone rubber and
200 tons silicone oil every month
6. Special organic silicon R&D team and precision inspection
instruments equiped
7. Automatic manufacturing equipment adopted, which ensure the products shipped quality well largely
If you need to know the prices of our silicone rubbers, please
contact us. We do not provide prices on the website because prices
fluctuate for many reasons.
