Description
RUI-HE 6250-15® is a kind of two-component liquid silicone rubber
for injection molding processes, consisted of part A and part B. It
can be used to produce kitchen utensils with fast setting,high
transparent, high tear resistance and good resistance to yellow.
All LSR are platinum cured (vulcanized) materials which are mixed
in a 1 : 1 ratio by weight.
Key Features and Benefits
- High transparency
- High temperature resistance
- Easy to clean
- Fast setting
- Good tensile strength and tear strength
- Food grade silicone rubber
- High-temperature resistance
- Good flexibility
- No smell, non-toxic, no yellowing
- Long shelf-time &lifetime
- Lower shrinkage
- High yellowing resistance
- High tear resistance
Typical Properties
| 6250-15® |
| Unit | Part - A | Part - B |
| Appearance | / | transparent | transparent |
| Shore A Hardness | A | 15±2 |
| Tensile Strength | MPa | ≥2.5 |
| Elongation | % | ≥600 |
| Tear Strength | KN/m | ≥6 |
| Viscosity | mPa.s | 800000-1400000 |
| Density | g/cm3 | 1.08±0.02 |
| Resilience | % | ≥30 |
| Tear off permanent deformation | % | 4.3 |
| Compression set | % | ≤25 |
These figures are for reference only, please contact us for
details.
Mixing ratio of components A : B = 1 : 1.
Vulcanization: 150 °C / 5 min
Applications
Because of the outstanding properties 6250-15® liquid silicone
rubber is particularly suitable for Kitchen utensils such as pot spoon, spatula, bowl, etc.
Certificate
Rui-He 6250-15® Liquid silicone rubber obtained the following test
certificate: RoHS, FDA.21.177, REACH, PAHS, ISO9001:2016, etc.
Packaging & Storage
Available in 20kg pails or 200kg drums.
Store in a cool, dry place out of direct sunlight, use it within 12
months from the day of manufacture.
Notice
This product cannot be contacted with compounds containing N, P, S
to avoid affecting the catalytic effect of platinum.
1. What's silicone products you are making?
--liquid silicone rubber, silicone rubber, silicone oil; Platinum
agent:
-- According to different silicone molds, our silicone has
different viscosity, and cause different hardness,
density to meet the requests from client.
2. Do you offer free sample to client?
--Yes, we can provide the sample for test.
3. How about the quality control in your factory?
--We have professional QC team.
--Each batch of silicone rubber must be tested by our safe quality
examination system.
4. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the
material into vacuum machine to take off the bubbles.
5. How to get good silicone mould to use longer time?
--The best way is:
1, Please choose the right liquid silicone according to your
products.
2, Don't use any silicone oil in mold making, because it can make
the silicone mould become too soft to use.
3, Silicone mould can be used longer after the whole silicone mould
fully cured, so it's better to wait 2 hours after mould finished.
6. Why silicone rubber add curing agent after mixing a lot of
bubbles?
--This is normal physical phenomena. The liquid will produce a
large number of bubbles in the mixing time, so, it must pass
through the vacuum exhaust bubble treatment.
If you need to know the prices of our silicone rubbers, please
contact us. We do not provide prices in website because prices
fluctuate for many reasons.
